Top 10 Tap and Die Set UK – Taps & Dies

As an Amazon Associate I earn from qualifying purchases.



Ser A Full Length Die Set 204Rugr

RCBS #ad - Type: 2 die Set. Fits: 204 Ruger. Made from case hardened steel. International products have separate terms, age ratings, including fit, are sold from abroad and may differ from local products, and language of product, labeling or instructions. Series a full length die Set.
BrandRCBS #ad
ManufacturerRCBS #ad
Height5.08 cm (2 Inches)
Length15.24 cm (6 Inches)
Width12.7 cm (5 Inches)
Part Number10301

2. toolant


3pcs, 4.1mm Drill Bit Combo for Threading, Tap and Die Set M5x0.9 Thread

toolant #ad - The drill bit is made of HSS, 65HRC hardness;. Tap and die are made of premium alloy steel, which can achieve a hardness of up to 63HRC. Tap and die set with drill bit Combo -- save customers' time in selecting the correct drill bits;.
Brandtoolant #ad
Manufacturertoolant #ad
Part NumberTap and Die Set
Modeltap die set

3. Joleully


Joleully M14 x 1.25mm HSS Metric Tap And Die Set Thread Tap And Round Thread Die Right Hand HSS Taper Silver Tone 2Pcs

Joleully #ad - Package contents: 1Pcs x Tap, 1Pcs x Die. Size: m14 x 1. 25mm, pitch:1. 25mm. Application: use for carbon steel, alloy steel and cast iron, such as through hole processing. Product name: Tap and Die Set. Materia: hssHigh Speed Steel.
BrandJoleully #ad
ManufacturerSHENGQING #ad
Part NumberCF2115-CF2133

4. Bosch


Bosch BPT14F28 1/4 in., 28 High-Carbon Steel Fractional Plug Tap

Bosch #ad - Rolled threads – deliver more accuracy and are cleaner than machined threads. Plug taps – engineered for cutting right-hand internal threads. Heat-treated carbon steel – provides superior durability and speed.
BrandBosch #ad
ManufacturerC & J Direct GmbH & Co. KG #ad
Height14.92 cm (5.88 Inches)
Length0.69 cm (0.27 Inches)
Width4.55 cm (1.79 Inches)
Part NumberBPT14F28

5. uxcell


Uxcell Machine Tap #2-56 UNC Thread 2B Class 3 Flutes High Speed Steel Screw Threading Tap Tapping Tool 5pcs

uxcell #ad - Micro taps are mainly used in clocks and watches for machining holes in wood and soft metals with low hardness. Wide applications: the thread tap is suitable for drilling mild steels, copper, iron, stainless steel, hard plastic, aluminum, processing through holes or shallow holes.

Add appropriate tapping oil for higher quality internal threads and more durable taps. Thread tap: thread size: #2-56 unc; class: 2b; thread length: 12mm / 047 inch; shank side Width: 2mm / 008 inch; total length: 46mm / 1. 81 inch. Recommended feed speed: ordinary steel: 6-15m/min; harder steel material: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min. Machine taps: used in drilling machines, milling machines, machining centers, automatic machines, tapping machines, CNC, not recommended for hand and electric drill tapping.

Straight flute tap: straight 3 flutes are ground to provide rapid downward chip removal for efficient threading, clear threads without burrs, right hand tapping direction. With uncoated base substrate only, suitable for general purpose tapping. High speed steel tap: the screw tap has high wear resistance, high strength and hardness, fast cutting speed, and long service life.
Branduxcell #ad
Manufactureruxcell #ad
Part Numbera23102400ux1321



Hanson 1448 Tap 9/16"-12 NC Plug, for Tap Die Extraction

IRWIN #ad - International products have separate terms, and language of product, are sold from abroad and may differ from local products, including fit, age ratings, labeling or instructions. This plug tap produces a class 2B thread. Each plug tap features straight flutes that are ground for rapid chip removal. 9/16" - 12 nc with a plug tap point. Designed for hand-threading work in a variety of materials.
BrandIRWIN #ad
ManufacturerIrwin #ad
Height1.78 cm (0.7 Inches)
Length8.13 cm (3.2 Inches)
Width8.38 cm (3.3 Inches)
Part Number1448

7. Drill America


Drill America POUCSNPT5 5 Piece Carbon Steel NPT Pipe Tap Set, 1/2" and 3/4", 1/8", 1/4", 3/8"

Drill America #ad - Npt pipe taps, 1/2"-14 npt, 3/8"-18 npt, sizes 1/4"-18 npt, 3/4"-14 nPT carbon steel Pipe taps in plastic pouch case. Carbon steel pipe taps are designed to clean and or re-thread damaged or Jam Pipe threads.

Straight flute tools allow chips to collect in the Flutes as they cut and are well suited for most applications in shallow cuts. Round shank with square end. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
BrandDrill America #ad
ManufacturerDrill America #ad
Part NumberPOUCSNPT5

8. C.K


CK Re-Threading Tool M3.5x0.6, Red

C.K #ad - High speed steel tap for a clean cut and long life. Precision ground threads for accurate threading and a 50 mm long tap length for improved access. Specially designed for clearing dirt and debris from patters screw tabs. Size: m3. 5 and 06 mm thread Pitch. A tough impact resistant handle.
BrandC.K #ad
ManufacturerC.K #ad
Height2 cm (0.79 Inches)
Length11.43 cm (4.5 Inches)
Weight0.04 kg (0.09 Pounds)
Width2 cm (0.79 Inches)
Part Number495028-CK TOOLS_IT
Warranty1 year.

9. GearWrench


SAE/Metric, 3887, Silver, GEARWRENCH 77 Piece Ratcheting Tap and Die Set

GearWrench #ad - Ratcheting t-handles wind dies with a 5 swing arc and have a reversing lever to eliminate hand-over-hand turning. Twist lock guide system reduces the walk back" of the die guide and keeps the dies centered while cutting.

Die adapter works on round and hex shaped dies. Auto-locking feature allow the tap adapters to be removed safely. Spring-loaded cap allows for quick release of large tap adapter. Drive extension adapters provide greater access in confined areas when used with 3/8" Drive extensions. Ratcheting t-wrench works with GEARWRENCH pass-thru socket system. Blow mold carrying case with tilted tap holders for easy access and storage. Die adapters work with the 3/8" Drive pass-thru ratchet and socket system as well as socket accessories.
BrandGearWrench #ad
ManufacturerGearWrench #ad
Part Number3887



82864N, GEARWRENCH 9/16 x 18 NF Hex Die

GEARWRENCH #ad - Most commonly used sizes of hex dies. Cuts external thread on round materials such as rods or bolts. Solid hex dies are made for cleaning up damaged threads.
ManufacturerApex Tool Group #ad
Height4.5 cm (1.77 Inches)
Length4.5 cm (1.77 Inches)
Width1.98 cm (0.78 Inches)
Part Number82864N