Top 10 PCIE SATA Card 6 Port UK – SCSI Port Cards

As an Amazon Associate I earn from qualifying purchases.

1. Rivo

#ad

Rivo PCIe SATA Card, Marvell 9215 Non-Raid, Support 6 SATA 3.0 DevicesSA3014, 6 Port with 6 SATA Cable, Boot as System Disk, SATA Controller Expansion Card with Low Profile Bracket

#ad
Rivo #ad - You could expand six 6Gb/s sata ssd or optical drives with this pcie sata card. Included 6 sata cables and a sata power splitter cable, make connection easier! With using the marvell 88se9215 chip and ASM1093 chips, improve this card more stable and compatible. Connect 6 large capacity storage devices at the same time. You could make the system to boot from this sata card but non RAID. But if your motherboard has raID function, you could make a RAID with this SATA card. Compatible with windows xp / 10 / 8 / maC / NAS / 7 / Linux OS.
BrandRivo #ad
ManufacturerR_M #ad
Part NumberR_M_Sata_6P_D
ModelAK3-AT1-GL-M-X

2. MZHOU

#ad

Built-in Adapter Converter for Desktop PC, MZHOU PCIe SATA Card 6 Port, with 6 SATA Cables and Low Profile Bracket, 6Gbps SATA 3.0 PCIe Card,Support 6 SATA 3.0 Devices

#ad
MZHOU #ad - With windows xp / 7/8/10 / Ubuntu. It is an expansion card that cannot support third-party chips. The raid in intel is only for original SATA. Connect 6 mass storage devices simultaneously. This pcie sata card contains six sata cables to simplify the connection! Use the 88se9215 chip and the asm109X chip to improve the stability and compatibility of the card. This pcie sata card allows you to add six 6 Gbps SATA 3. 0 devices to your computer a driver is required for two of the satellites. Note: the 6-port does not support raid.
BrandMZHOU #ad
ManufacturerMZHOU #ad
Part NumberMzhou-6P
ModelAK3-AT1-GL-M-X

3. Socobeta

#ad

Socobeta 6-Port SATA 3.0 Expansion Card PCI Express Riser Card Multifunctional Adapter Card Compatible with SATA6G 3G 1.5G HDD

#ad
Socobeta #ad - Ordinary disk connectionafter inserting the system disk into the motherboard, you only need to check the adapter card information and the ordinary disk model during startup. Excellent performancethis multi-function riser card supports communication speeds of 6.

0 gbps, 3. 0 gbps and 1. 5 gbps, supports fis based on port multiplier switching or command switching, as well as AHCI1. 0 mode and IDE mode. It is compatible with SATA6G, 3G and 1. 5g hard drives. When you still cannot boot, if it is installed in IDE mode, the system can only be reinstalled to SATA3. 0 via pCIE. Multifunctionalthis portable expansion card supports gen 1i, gen 2x and gen 3i. If you still cannot start to enter the motherboard BIOS, please enter the motherboard BIOS and set SATA to Disabled.

At the same time, gen 1x, gen 2i, this expansion card supports Native Command Queuing NCQ, Gen 2m, supports hot swap and 4 SATA. System disk connectionif the system disk system with the original motherboard is tested in ahci mode, please set the system disk to boot for the first time. If the conditions are met, or the system cannot be started, insert the ordinary disk into the PCIE to SATA3. 0 card, you must enter the motherboard BIOS and set the system disk to start for the first time.
BrandSocobeta #ad
ManufacturerSocobeta #ad
Height2 cm (0.79 Inches)
Length12 cm (4.72 Inches)
Weight0.09 kg (0.2 Pounds)
Width10 cm (3.94 Inches)
Part NumberSocobetasze13xg45m

4. Kafuty

#ad

Kafuty PCI-E SATA Expansion Card, 6-Port PCI Express SATA 3.0 Controller Card Compatible for SATA6G 3G 1.5G Hard Drives, Support Hot Swap

#ad
Kafuty #ad - Compliant with pci-express v2. 0 specification and backward compatible with PCI-Express v1. 0 Support hot swap. Compliant with serial sata 3. 0 specification, backward compatible with SATA2. 0 sata1. 0 Support gen 1i, gen 2i, gen 1x, Gen 2x, gen 2m, and Gen 3i. Compatible with sata6g, 3g and 1. 5g hard drives. Support ahci1. 0 mode and IDE mode. Support fis based on port multiplier switch or command switching. Support 4 SATA. Support for native command queue NCQ.
BrandKafuty #ad
Height2 cm (0.79 Inches)
Length12 cm (4.72 Inches)
Weight0.09 kg (0.2 Pounds)
Width10 cm (3.94 Inches)
Part NumberKafuty9ta7xcewys

5. needlid

#ad

Needlid Expansion Card, SATA 3.0 Adapter Card for 99% PC for NAS/LINUX/WIN XP, PCI-E to 6-Port SATA 3.0 6-Port Adapter Card

#ad
needlid #ad - Equipped with 6 sata3. 0 interfaces, expansion card is in line with PCI-E2. 0 specification. Supports 6 sata hard disk connections and the transmission rate can be 6Gbps.

Anti-tip and anti-collision to protect the safety of components in all directions. And such expansion card keeps more stable operation performance and longer service life than other ordinary non-protective cover shield. For asm chip, such adapter card can be plug and play without power supply. Whether you are using an ordinary individual computer or a dedicated high-end computer, compatible with 99% desktop computers, it is all compatible. Sata3-t6 adopts protective cover design. Sata3-t6 is fit for win xp/vista/7/8, and truly meets the needs of popularization.
Brandneedlid #ad
Manufacturerneedlid #ad
Height0 cm (0 Inches)
Length0 cm (0 Inches)
Weight0.09 kg (0.19 Pounds)
Width0 cm (0 Inches)
Part Numberneedlidtro6aq8uew

6. ASHATA

#ad

SATA III 6 Port PCI-e x4 Controller Card Expansion Adapter Riser Card with Low Profile 2U Baffle for Windows XP/2003/Vista/win7/win8/win1032/64bit, etc, ASHATA PCIe SATA Card

#ad
ASHATA #ad - The tail is flush, thus there is less chance of blocking the graphics card fan. The speed of a single port can reach about 520M under PCI-E2. 0, bringing great using experience. Larger cooling fin, better heat dissipation effect, more suitable for long time work. The product is equipped with rear 6-port design, universal for both small and large computer case, convenient for wiring. Four-layer circuit board with isolation layer in the middle for stronger anti-interference ability.
BrandASHATA #ad
ManufacturerASHATA #ad
Height0 cm (0 Inches)
Length0 cm (0 Inches)
Weight0.14 kg (0.31 Pounds)
Width0 cm (0 Inches)
Part NumberASHATAi2g0ryo7v8

7. Vantec

#ad

Vantec 4-Channel 6-Port SATA 6Gb/s PCIe RAID Host Card with HyperDuo Technology UGT-ST644R

#ad
Vantec #ad - Supports windows xp, 8, server 2003/2008, 8.1, 10; for raid use, 7, vista, must do a new clean install of the OS to boot. Note: cannot boot if you just move your drive to this controller, write to vantecusa technical support for more info.

4 channels for 4 storage devices such as SSD or HDD. Raid 0, 1, 10 and hyperduo function for redundancy to Keep your Data Safe and Faster Disk Access, Low Profile Bracket Included. Raid configuration is on the drives; install only on true PCIe x4 slot or x8 or x16 slot only, download latest drivers from vantecusa website. 1 port multiplier function for multi-bay enclosures 4 drives, support both FIS and command-based switching. Configurable port as internal sata or external eSATA port, SATA III 6Gb/s on every channel for all your SSD and HDD. This card will let you grow as your needs grow to add more devices to your system.
BrandVantec #ad
ManufacturerVantec #ad
Height14.61 cm (5.75 Inches)
Length20.32 cm (8 Inches)
Weight0.18 kg (0.4 Pounds)
Width3.81 cm (1.5 Inches)
Part NumberUGT-ST644R
ModelUGT-ST644R

8. Docooler

#ad

Docooler PCI-E SATA III 6 Ports Adapter Card PCI Express to SATA Controller Card SATA Expansion Card with Low Profile Bracket

#ad
Docooler #ad - Support large capacity hard drive disk. Featuring 6 sata ports, this adapter card can also be used as system disk. High data transfer speed up to 6Gbps. Support hot-plug and plug and play. Support small computer case and low profile bracket is included in the package.
BrandDocooler #ad
ManufacturerDocooler #ad

9. Tonysa

#ad

Tonysa 6-Port PCI Express Card, SATA 3.0 PCI-e Expansion Controller, PCI Express Riser Card for SATA6G 3G 1.5G HDD, Compatible with WinXP/7/8/10/Linux

#ad
Tonysa #ad - Compliant with pci-express v2. 0 specification and backward compatible with PCI-Express v1. 0 Compliant with serial sata 3. 0 specification, backward compatible with SATA2. 0 sata1. 0 Support gen 1i, gen 2i, gen 1x, Gen 2x, gen 2m, and Gen 3i. Support fis based on port multiplier switch or command switching. Compatible with sata6g, 3G and 1. 5g hard drives.
BrandTonysa #ad
ManufacturerTonysa #ad
Height2 cm (0.79 Inches)
Length12 cm (4.72 Inches)
Weight0.09 kg (0.2 Pounds)
Width10 cm (3.94 Inches)
Part NumberTonysa09ozqdbgvk

10. ASHATA

#ad

ASHATA PCIE to SATA3.0 Riser Card,6-Port SATA 3.0 PCI Express Expansion Card Riser Card Compatible for SATA6G 3G 1.5G HDD,6-port SATA3.0 Expansion Card Support Hot Swap,Support 4 SATA.

#ad
ASHATA #ad - Support fis based on port multiplier switch or command switching. Compliant with pci-express v2. 0 specification and backward compatible with PCI-Express v1. 0 Compatible with sata6g, 3g and 1. 5g hard drives. Support AHCI1. 0 mode and IDE mode. Support for native command queue NCQ. Compliant with serial sata 3. 0 specification, backward compatible with SATA2. 0 sata1. 0 Support gen 1i, gen 2i, gen 2x, gen 1x, gen 2m, and gen 3i. Supports communication speeds of 6. 0 gbps, 3. 0 gbps and 1. 5 gbps.
BrandASHATA #ad
ManufacturerASHATA #ad
Height2 cm (0.79 Inches)
Length12 cm (4.72 Inches)
Weight0.09 kg (0.2 Pounds)
Width10 cm (3.94 Inches)
Part NumberASHATAbcfqyriusa